Aira Euro Automation Private Limited

Being one of the renowned firms in the industry, we are dedicatedly involved in providing a high-quality array of Pneumatic Rotary Scotch & Yoke Actuator Aluminium Body (Single Acting)

"AIRA" Offers The SYS Series has been equipped with a universal drive shaft which suit both DIN and ISO Standards. This even future facilitates mounting and installation. Low friction sealings in combination with a high surface finish, permanent lubrication and bearings give the actuator high efficiency, low air consumption and a long maintenance - free life, This ensure a long - term stable economy due to low energy consumption and a minimum of unplanned and costly production shutdowns. Aggressive environments and complicated application sometimes require specially adapted solution : The SYS Series is available in many different design.


Features :

• For On-Off and modulating.
• Compact design.
• Connections according to international standards.
• Double acting or single acting with spring return.
• Scotch Yoke principle gives high torque in the end positions.
• 30% pre-tensioned springs to storage power for safety.
• Mounting kits for all types of quarter turn valves.
• Drive shaft in 40Cr(a special kind of alloy)
• Housing in anodized aluminum.
• Precise control, smooth travel in the end positions
• Housing in anodized aluminum.
• Precise control, smooth travel in the end positions.
• High reliability, long life, three-year warranty.
• High efficiency, low air consumption.
• Temperature range -25°C to +90°C.

Being one of the renowned firms in the industry, we are dedicatedly involved in providing a high-quality array of Pneumatic Rotary Scotch & Yoke DOUBLE DECKER Actuator Aluminium Body (Double Acting)

"AIRA" Offers The JOB Series has been equipped with a universal drive shaft which suit both DIN and ISO Standards. This even future facilitates mounting and installation. Low friction sealings in combination with a high surface finish, permanent lubrication and bearings give the actuator high efficiency, low air consumption and a long maintenance - free life, This ensure a long - term stable economy due to low energy consumption and a minimum of unplanned and costly production shutdowns. Aggressive environments and complicated application sometimes require specially adapted solution : The JOB Series is available in many different design.


Features :

• For On-Off and modulating.
• Compact design.
• Connections according to international standards.
• Double acting or single acting with spring return.
• Scotch Yoke principle gives high torque in the end positions.
• 30% pre-tensioned springs to storage power for safety.
• Mounting kits for all types of quarter turn valves.
• Drive shaft in 40Cr(a special kind of alloy)
• Housing in anodized aluminum.
• Precise control, smooth travel in the end positions
• Housing in anodized aluminum.
• Precise control, smooth travel in the end positions.
• High reliability, long life, three-year warranty.
• High efficiency, low air consumption.
• Temperature range -25°C to +90°C.

Being one of the renowned firms in the industry, we are dedicatedly involved in providing a high-quality array of Pneumatic Rotary Scotch & Yoke DOUBLE DECKER Actuator Aluminium Body (Single Acting)

"AIRA" Offers The JOS Series has been equipped with a universal drive shaft which suit both DIN and ISO Standards. This even future facilitates mounting and installation. Low friction sealings in combination with a high surface finish, permanent lubrication and bearings give the actuator high efficiency, low air consumption and a long maintenance - free life, This ensure a long - term stable economy due to low energy consumption and a minimum of unplanned and costly production shutdowns. Aggressive environments and complicated application sometimes require specially adapted solution : The JOS Series is available in many different design.


Features :

• For On-Off and modulating.
• Compact design.
• Connections according to international standards.
• Double acting or single acting with spring return.
• Scotch Yoke principle gives high torque in the end positions.
• 30% pre-tensioned springs to storage power for safety.
• Mounting kits for all types of quarter turn valves.
• Drive shaft in 40Cr(a special kind of alloy)
• Housing in anodized aluminum.
• Precise control, smooth travel in the end positions
• Housing in anodized aluminum.
• Precise control, smooth travel in the end positions.
• High reliability, long life, three-year warranty.
• High efficiency, low air consumption.
• Temperature range -25°C to +90°C.

Being one of the renowned firms in the industry, we are dedicatedly involved in providing a high-quality array of Heavy Duty Pneumatic Rotary Scotch & Yoke Actuator (Double Acting)

"AIRA" Offers SAY-SA Series heavy duty Scotch Yoke Actuators offer a broad range of torques to 50178 NM. The Scotch & Yoke is designed to operate Ball, Butterfly, Plug Valves, Dampers or any device that requires a quarter-turn movement for on-off or throttling services. Our standard offering is te symmetrical design yoke that delivers maximum torque at both ends of the 90o cycle. The square sliding bearing with guide bar gives high cycle life and smooth stroke while minimizing wear points. As with all "AIRA" actuators, our Scotch & Yoke comes with a complete line of accessories, including jackscrew, hydraulic overrides, limit switches, solenoids and positioners...


Features

• Travel adjustment +/-8o for clock wise and counter-clock wise strokes
• Nitrile rubber piston O-rings offer excellent sealing and wear. Optional low and high temperature seals and lube are available
• PTFE Guide Band supports piston while providing smooth operation and extended life
• Extra large, strong piston rod for long life and torque transmission
• Namur accessory mounting pads permit mounting standardization of limit switches, positioners etc.
• Ductile iron center body
• Modular design allows for installing power groups and spring  cartridges so that actuators may be set up for different air pressures and for Fail Clockwise and Fail Counter-clockwise
• Rugged heavy duty steel pressure cylinders chrome plated for long wear and corrosion resistance 
• Safe, welded spring cartridges with numerous options for a broad range of air pressure conditions
• Alloy Steel, corrosion resistant and heat treated springs designed and manufactured for long high cycle life
• Steel slide block, bronze slide bearings to minimize friction and provide long cycle life Visual position indicator
• Carbon steel Scotch Yoke mechanism available in symmetric form
• Totally enclosed weatherproof central body

Being one of the renowned firms in the industry, we are dedicatedly involved in providing a high-quality array of Pneumatic Rotary Scotch & Yoke Actuator Aluminium Body (Double Acting)

"AIRA" Offers The SYD Series has been equipped with a universal drive shaft which suit both DIN and ISO Standards. This even future facilitates mounting and installation. Low friction sealings in combination with a high surface finish, permanent lubrication and bearings give the actuator high efficiency, low air consumption and a long maintenance - free life, This ensure a long - term stable economy due to low energy consumption and a minimum of unplanned and costly production shutdowns. Aggressive environments and complicated application sometimes require specially adapted solution : The SYD Series is available in many different design.


Features :

• For On-Off and modulating.
• Compact design.
• Connections according to international standards.
• Double acting or single acting with spring return.
• Scotch Yoke principle gives high torque in the end positions.
• 30% pre-tensioned springs to storage power for safety.
• Mounting kits for all types of quarter turn valves.
• Drive shaft in 40Cr(a special kind of alloy)
• Housing in anodized aluminum.
• Precise control, smooth travel in the end positions
• Housing in anodized aluminum.
• Precise control, smooth travel in the end positions.
• High reliability, long life, three-year warranty.
• High efficiency, low air consumption.
• Temperature range -25°C to +90°C.

Being one of the renowned firms in the industry, we are dedicatedly involved in providing a high-quality array of Heavy Duty Pneumatic Rotary Scotch & Yoke Actuator (Double Acting)

"AIRA" Offers SAY-DA Series heavy duty Scotch Yoke Actuators offer a broad range of torques to 116984 NM. The Scotch & Yoke is designed to operate Ball, Butterfly, Plug Valves, Dampers or any device that requires a quarter-turn movement for on-off or throttling services. Our standard offering is te symmetrical design yoke that delivers maximum torque at both ends of the 90o cycle. The square sliding bearing with guide bar gives high cycle life and smooth stroke while minimizing wear points. As with all "AIRA" actuators, our Scotch & Yoke comes with a complete line of accessories, including jackscrew, hydraulic overrides, limit switches, solenoids and positioners...


Features

• Travel adjustment +/-8o for clock wise and counter-clock wise strokes
• Nitrile rubber piston O-rings offer excellent sealing and wear. Optional low and high temperature seals and lube are available
• PTFE Guide Band supports piston while providing smooth operation and extended life
• Extra large, strong piston rod for long life and torque transmission
• Namur accessory mounting pads permit mounting standardization of limit switches, positioners etc.
• Ductile iron center body
• Modular design allows for installing power groups and spring  cartridges so that actuators may be set up for different air pressures and for Fail Clockwise and Fail Counter-clockwise
• Rugged heavy duty steel pressure cylinders chrome plated for long wear and corrosion resistance 
• Safe, welded spring cartridges with numerous options for a broad range of air pressure conditions
• Alloy Steel, corrosion resistant and heat treated springs designed and manufactured for long high cycle life
• Steel slide block, bronze slide bearings to minimize friction and provide long cycle life Visual position indicator
• Carbon steel Scotch Yoke mechanism available in symmetric form
• Totally enclosed weatherproof central body

Being one of the renowned firms in the industry, we are dedicatedly involved in providing a high-quality array of Double Acting Pneumatic Rotary Actuator As Per ISO 5211

Price Range:

• 2625 Rs to 8905 Rs per piece as per quality.

Features

• Double Acting Rack & Pinion Actuator (SIL3, ATEX, CE, ISO APPROVED) Validated for 5,00,000 Cycles
• Hard Anodized Aluminium Body
• ISO 5211 Mounting Pad in rotary actuator for easy mounting
• Wide range of torque upto 10255

With our expertise and adherence to quality, we are engaged in offering an optimum quality range of 3 Position Pneumatic Rotary Actuator.

"AIRA" Offers Three position actuator provides an operation of 0°, 45°, 90° or the random travel of middle position. The middle position is achieved by the mechanical brake which is caused by the movement of the two auxiliary pistons. It is adjustable.

Features

• Actuator is suitable for coarse - fine adjustment, typically for batching operations or processes
• The Actuator has to be Double Acting
• The repeatability is 100% since stopping is by mechanical stoppers. It is suitable for application calling for the precise fine-coarse adjustment like liquid  filling system
• The Actuator can be switched to one, position from  any other position very easily with the solenoid control. The 3rd position is achieved by the mechanical stopping of the piston movement, in the return stroke by pneumatic stopper pistons
• The Intermediate position is present at 20% opening. The opening can be adjusted as required by the set screw. This is field adjustable
• Actuator as a standard, works in reverse action, as opposed to conventional configuration  i.e. piston inward stroke opens the valve, and piston outward stroke closes the valve
• The End Stops (+/- 10°) are provided on the closing and opening side of the Actuator for setting valve closing  precisely

Being one of the renowned firms in the industry, we are dedicatedly involved in providing a high-quality array of Double Acting Pneumatic Rotary Actuator As Per ISO 5211

Features

• Double Acting Rack & Pinion Actuator (SIL3, ATEX, CE, ISO APPROVED) Validated for 5,00,000 Cycles
• Hard Anodized Aluminium Body
• ISO 5211 Mounting Pad in rotary actuator for easy mounting
• Wide range of torque upto 1179

The double acting pneumatic rotary actuators are available with 180° rotation. The quarter-turn family valves like ball valves, butterfly valves, and plug valves required only 90° rotation to come into action. While multi-way valves like 3 way or 4 way valves require 180° rotation, because of this the double acting pneumatic actuator 180° is used. To operate a multi-way ball valve or plug valve remotely, you need to install the pneumatic actuator with 180° rotation. There are 180° Pneumatic Single Acting Rotary Actuators Rotates are also available.

Our extensive range caters to the requirement of diverse industries such as chemical processing, pharmaceutical ,liefe science

Being one of the renowned firms in the industry, we are dedicatedly involved in providing a high-quality array of Single Acting Pneumatic Rotary Actuator As Per ISO 5211

Features

• Single Acting Rack & Pinion Actuator (SIL3, ATEX, CE, ISO APPROVED) Validated for 5,00,000 Cycles
• Hard Anodized Aluminium Body
• ISO 5211 Mounting Pad in rotary actuator for easy mounting
• Wide range of torque upto 1179

Being one of the renowned firms in the industry, we are dedicatedly involved in providing a high-quality array of Single Acting Pneumatic Rotary Actuator As Per ISO 5211 180 Degree Rotation

Features

• Suitable typically for 3 way valves, requiring ON-OFF operation. It is available in Single Acting Spring Return
• The Single Acting 180 Degree Rotation actuator can provide center off for the 3 way ball valve, bottom entry by choosing the option of 3 position
• The end stop adjustment is provided for opening and closing direction as a standard
• Actuator mounting is as per ISO 5211 & Accessories to Namur Solenoid Valve

The Aira Valve Actuator delivers reliable and efficient automation for valve operations across diverse industries. Available in pneumatic and electric variants, it ensures precise control with minimal maintenance. Built for durability and smooth performance in harsh environments. Ideal for use with ball, butterfly, and other quarter-turn valves.

 

Due to our proficiency in this field, we are engaged in presenting Stainless Steel Pneumatic Rotary Actuator. We are presenting these products to customers within given time-frame.

"AIRA" Offers SRA Series pneumatic actuators are stainless steel actuator which incorporate latest mechanical technology, materials available and our expertises , through designing, developing, testing and engineering application, we have obtained a high grade product with the characteristics of reliability, high performance, long cycle life, large  adjustment, highest levels of corrosion protection, wide selection  of model with easy and economy.

Operting Conditions

• Operating Media Dry or lubricated air, the non-corrosive gassed or oil
• Air supply pressure double acting : 2 ~ 8 Bar : Spring return : 2 ~ 8 Bar
• Operating Temperature Standard (NBR 'O' - Ring -20 °C ~ +80 °C) Low Temperature (Silicon 'O' - Ring -35 °C ~ +80 °C) High Temperature (Viton 'O' - Ring -15 °C ~ +150 °C)
• Travel adjustment have adjustment range of ±4O for the rotation at 90°
• Lubrication Under normal operating condition, need not accrete lubricant
• Application Either indoor or out door
• Highest pressure the maximum input pressure is 10 Bar

Maintenance

• It is recommended that periodic checks be performed to make sure that all fasteners remain tight.
• The actuator is supplied ready - lubricated no further lubrication is required. If lubrication is deemed necessary, Use EP - 1 grease.
• Under certain working conditions (Heavy duty, non - compatible operating media or abnormal operating conditions) Internal seals should be checked periodically and replaced when necessary.
• On spring return actuators, spring fatigue may set in requiring the replacement of spring. Spring should always be replaced in full sets.

Pneumatic Valve Actuator

Electro-pneumatic Rotary Pneumatic Positioner, 4-20 mA

Pneumatic Rotary Pneumatic Positioner, 0.2-1 bar

Rotary Pneumatic Actuator

Double Acting Actuator

Electro Pneumatic Positioner Valves

Single Acting Actuator

Scotch And Yoke Actuator

Valve positioners & actuators

Diaphragm Actuator

Rack And Pinion (S.S)